Advanced LDDTool Techniques
There are some advanced techniques available via the <Ingest_LDD> document and the LDDTool that might be useful in some complex cases. On the whole, SBN recommends that you resort to these only when there are compelling reasons to do so. These features are the more experimental, and thus more unstable, parts of the package.
Last update: 2020-07-30, for IM 184.108.40.206 (1E00 schemas)
- 1 Schematron Rules
- 2 Choice List
- 3 Any Block
- 4 Cross-Referencing Namespace Elements
Schematron rules can be used to check the sort of contingency relationships (i.e., "If A, then B") that XML Schema is not particularly good at. PDS also uses Schematron to define enumerated value lists rather than XML Schema largely for the diagnostic benefits - we can include the list of valid values in the Schematron error message.
Schematron rules are applied to an XML document via a two-step process involving style sheet translations (XSL). There are some subtleties to how and when Schematron rules are triggered, so if you're going to start writing Schematron rules yourself you should take some time to become familiar with the details of the standard. There are also multiple forms of the standard with a couple of significant differences in capabilities for the more advanced Schematron programmer. PDS requires ISO Schematron, which is available as a "Publicly Available Standard" (i.e., free if you promise to behave yourself) from this ISO website: http://standards.iso.org/ittf/PubliclyAvailableStandards. Search for "Schematron".
A limited capability to define additional Schematron rules as part of LDDTool processing is provided via the <DD_Rule> class. DD_Rule classes may be added after the <DD_Class> definitions in your <Ingest_LDD> document. Details for filling out the class are on the Filling Out the DD_Rule Class page.
The XML Schema Definitions (XSD) language is very strictly ordered, but it does provide one exception to this rule: the
What Is It?
choice structure is a mechanism that allows your label writers to use one or more of a list of attributes or subclasses at a particular point in a local class structure. In those cases where more than one list item may be included, the items may occur in any order, and may themselves be repeated. In other words, if I define a
choice list containing A, B, and C, and allow label writers to select up to three of these to include, they can include B three times, or C then A and then C again, and either case would be considered equally valid (along with all the other permutations, of course).
So, on the one hand the
choice construct defeats some of the validation we get from using XSD, but on the other hand sometimes you can't practically code all the explicit contingencies you might have in certain scenarios.
On the whole, you should usually have some compelling reasons to resort to a
choice construct in a local dictionary because of the impact on validation. "I keep getting errors from having my attributes out of order" is not a "compelling reason".
How Do I Do It?
The basic technique is to use a single <DD_Association> class to list all the possible attributes or subclasses that may be included at that point in the containing class being defined. Within that single DD_Association:
- Repeat the <local_identifier> tag for each attribute or class you want to include in the
- Somewhere in that list of local_identifiers, add this:
choicelist defined in this way may contain only one kind of referenced object - either all attributes or all classes, but not both in the same DD_Association. (This is a current constraint on Ingest_LDD and LDDTool.)
- The <minimum_occurrences> and <maximum_occurrences> values you provide for this DD_Association refer to the total number of selections that may be made by a label writer from the list of things corresponding to the local_identifier values. If you specify minimum_occurrences of 0 (zero), then including nothing from the selection list is a valid option for a label.
- There is currently no way to specify in the Ingest_LDD file, or in the output XSD file, that multiple selections may be made, but no single option may be repeated. You can add a Schematron rule via the DD_Rule class to make that constraint.
One popular use for a
choice list is to code an "exactly one of the following" option by a creating a multi-element
choice list that requires exactly one of its contents be present. In order for this to work as desired, make sure that the <minimum_occurrences> and <maximum_occurrences> attributes for the DD_Class are both set to 1 (one).
Any blocks are used within the shared PDS4 namespaces to pass validation control from one dictionary to another within a defined class.
What Is It?
any construct specifies that from this point until the closing tag of the current XML element, any elements from any namespace may be included and will not be subject to validation by the rules defined for the current namespace (they are required to be syntactically valid XML).
(Actually, you can also include elements from the current namespace, and they will be subject to validation as though they had occurred in their usual place in their label. This, however, is an excellent way to generate almost completely intractable error messages, and should be avoided.)
How Do I Do It?
As the last association in your <DD_Class> (yes, it absolutely must be the "last" association, since anything after an
any statement in the schema is ignored with respect to the defining class definition), add one more <DD_Association> class with a <local_identifier> value of "
XSAny#". The remaining attributes of DD_Class must be there, but will be ignored.
- If a schema validator can identify what namespaces the elements in the
anyarea come from, and has a schema to validate them against, it will do so and report errors accordingly. So if you plan to include
anyblocks in your local dictionary classes, you should expect that your PDS standards reviewers will require that they only reference attributes and classes from namespaces for which PDS administers the defining schema.
- Using the
anyconstruct abdicates control of both content and validation for that part of your mission labels. If you do not have direct and significant influence over what might be thrown into this unregulated label area, you really shouldn't be leaving this particular barn door open.
Cross-Referencing Namespace Elements
There are couple of times when this is the preferred mehod for defining classes, but on the whole this should be used with extreme caution in other cases.
What Is It?
A namespace cross-reference invokes an attribute or class defined in another dictionary (we'll call these external elements) for use in a class that you are defining in your own dictionary. This external element will appear in labels as it appears in its own namespace, preserving its own namespace references, just interpolated into your class.
The XML technique involved is to change the namespace of reference at some local level. There are a couple different ways to do this, including using namespace abbreviation prefixes (like "
pds:" or "
disp:") on the tags.
How Do I Do It?
At the point in the DD_Class definition where you want to include the external element (attribute or subclass), add a <DD_Attribute> class as you would if the element was in this dictionary, with one exception: form the
<local_identifier> as "ns.name", where ns is the PDS4 reserved namespace abbreviation for the external dictionary, and name is the name of the attribute or class you want to reference as it appears in the dictionary XSD file. Note that the namespace abbreviation separator in this case is a full stop ('.'), and not the usual colon (':').
The example file set (File:LDDTool 1E00 examples.zip) includes examples of how to reference the <pds:Internal_Reference> class and <pds:local_identifier> attributes for use in local dictionaries. These are used to provide a standardized method for internal referencing, and also to make the full functionality of these key references available to local dictionary authors.
When Should I Do It?
There are a small number of standard places where you should do this in order to take advantage of useful conventions established in the PDS-controlled namespaces. These are:
- Referencing Other PDS4 Archive Products
- If you want to create a link from a class you're defining to a PDS4 product somewhere else in the archive, use the <Internal_Reference> class defined in the pds: dictionary. (Note that you will also need to define values for the <pds:reference_type> attribute in your own Schematron file to go with this use.) Internal_Reference has a standard format recognized by PDS4 tools that enables direct access to the referenced product via a PDS registry, which is a handy capability to be able to offer end-users. To use it, add a <DD_Attribute>' class with a <local_identifier> value of "pds.Internal_Reference" and a <reference_type> of "component_of".
- Cross-referencing Classes in the Same Label
- If you need to explicitly link, for example, a set of parameters to a data object, use the <pds:Local_Internal_Reference> to reference the <pds:local_identifier> of the target class (in the example case, a data object class like <Array_2D_Image>. As with pds:Internal_Reference, you'll need to define values for the <pds:local_reference_type> attribute as well. As for pds:Internal_Reference, you include a <DD_Attribute> class with a local_identifier of "pds.Local_Internal_Reference".
- Referencing an External Source
- If you need to include a formal reference to an external source (perhaps a published article, or a source product from a non-PDS4 archive), include the <pds:External_Reference> class using the same method as in the previous two cases. In this case there is no corresponding pds:reference_type to define. The advantage of using this class for external references is that it makes it possible for PDS tools to retrieve these references and report them to bibliographic services like the ADS to help in generating citation counts for the referenced works.
When You Shouldn't Do This
Sometimes, in very limited circumstances, there may be compelling reasons for a mission dictionary to directly reference elements defined in other namespaces. Here's why you shouldn't do this in most typical mission dictionaries:
- You have no control over changes in the referenced namespace.
- You must assume the author of the other namespace has no knowledge of or interest in your cross-references.
- You must assume there is no commitment on the part of the author of the other namespace to maintain his elements in a way that will not invalidate your cross-reference, technically or informationally.
- You are requiring end-users to go outside your own dictionary to understand classes defined in your dictionary.
Even references to discipline dictionaries my be problematic if that dictionary has not specifically designed and designated its classes for this sort of use. If you really think you need to pull in elements from dictionaries you do not control, talk to your PDS node consultant first.
And then don't do it.
If, however, you find yourself managing a large mission in which teams or instruments are each creating their own dictionaries, in addition to the overarching mission dictionary, then you might have both good reasons and sufficient control to reasonably reference, say, the mission dictionary from the instrument dictionaries, or conversely. In which case, have at it - and contact your PDS node consultant if you need advice.
More Reasons Why You Shouldn't Do This
This is an extremely experimental capability that has not been nearly fleshed out as yet. In particular, note that:
- The namespace abbreviation in itself is not sufficient to identify a namespace, and even within the reserved PDS4 namespace abbreviations, it carries no information about versioning. All versions of a namespace have the same reserved abbreviation.
- If you write and validate your dictionary based on assumptions related to a particular version of the namespace you're referencing, you have no way at present to prevent erroneous linking to a different and potentially incompatible version of the same external namespace in labels. Worse, the labels may attempt to reference two different versions of the same namespace. At best, this generates validation warnings that may or may not be safely ignored. At worst, validation will be completely and wordlessly undermined as the software environment decides which version of the namespace should apply.
- LDDTool decides which version of the core dictionary or a discipline dictionary it will pull its definitions from - you cannot alter that. Which version of any particular namespace that it will reference depends on what is programmed into the specific version of the LDDTool you're using. This may not be the same version of the discipline dictionary referenced directly in labels for other reasons. In fact, if you've updated your version of LDDTool, it might not even be the same version that was referenced last time you ran the tool.
- Some classes you include with the [namespace_id].[element] syntax will be included by type, others by reference - and which method is employed depends on what is in that other schema. Which method is used also affects which namespace each part of the definition lives in, which in turn affects how your Schematron rules should be formulated. If you are not extremely detail-oriented in your approach to testing your output schemas, an error in namespace can go undetected indefinitely.