Filling Out the Geometry Lander Class

From The SBN Wiki
Revision as of 22:01, 24 January 2019 by Plawton (talk | contribs) (safety save)
Jump to navigation Jump to search

Filling out the Geometry Lander Class

WORK IN PROGRESS

The Geometry_Lander class provides geometric values related to lander spacecraft observations.

<Articulation_Device_Parameters>

OPTIONAL
This class may occur multiple times.
This class is available to describe anything on the lander that can move independently of the craft as a whole - for example, filter wheel, scan platforms, mast heads, arms, etc.

<device_id>

OPTIONAL
This string (1 to 255 characters) specifies the short name or acronym of the articulation device. This attribute may only occur once per Articulation_Device_Parameters class occurrence.

<device_name>

REQUIRED
This string (1 to 255 characters) specifies the common name of the articulation device. This attribute may only occur once per Articulation_Device_Parameters class occurrence.

<device_mode>

OPTIONAL
This string (1 to 255 characters) specifies the physical configuration of the articulation device. The values are mission specific - please see your friendly PDS Representative if you need assistance. This attribute may only occur once per Articulation_Device_Parameters class occurrence.

<device_phase>

OPTIONAL
This string (1 to 255 characters) specifies the phase of the mission, from an articulation-device-centric point of view. Ask Anne about:The values are mission specific - please see your friendly PDS Representative if you need assistance. This attribute may only occur once per Articulation_Device_Parameters class occurrence.



<Camera_Model_Parameters>

OPTIONAL
This class may occur multiple times.

<Coordinate_Space_Definition>

OPTIONAL
This class may occur multiple times.

<Derived_Geometry>

OPTIONAL
This class may occur multiple times.

<Motion_Counter>

OPTIONAL
This class may occur multiple times.